Fill hardener to level a see diagram above of the bottle this equates to 250ml of system 20 hardener.
Raptor tintable bed liner instructions.
Mixing by weight pot life of raptor when activated is 60 minutes at 68 f 20 c.
Dries rapidly is flexible and helps deaden sound and vibrations.
4 x 750ml raptor base coating.
Prime with an etch primer such as two coats of u pol acid 8.
Clean and degrease the surface.
The do it yourself kit has been around for a decade but recent times have seen the uses grow to a multitude of applications.
Raptor truck bed liner black 2k protective urethane coating flash off min 18 22 c between coats 60 minutes touch dry 20 c less than 1 hour light duty 20 c 2 3 days regular duty 20 c 5 7 days baking i r.
Abrade with a fine abrasive pad 3.
Abrade the surface with p120 p180 abrasives.
Just my experience with mixing metallic tint into raptor liner tintable spray.
Abrade the surface with p80 p180 grit sand paper.
Add basecoat tinter to level b indicated in the diagram above this equates to 10 of basecoat tinter by volume.
Each kit contains four bottles of raptor and one tin of hardener.
The 1 us gallon raptor kit is the industry standard in bedliner coating.
1 x 1l raptor hardener.
Let sprayed raptor dry for 24 hours 2.
Thinking outside of the box literally is the direction this product is taking.
Remove all loose material and any rust from the surface to be coated.
Fill hardener to level a see diagram above of the bottle this equates to 250ml of system 20 hardener.
Replace cap and shake for 2 minutes.
Check the color before spraying.
Measure 8 4fl oz 250ml of raptor hardener and add into raptor tintable base bottle as well.
Clean and degrease the surface.
Replace cap andshake the bottle filled with hardener and basecoat vigorously for 2 minutes.
Aluminium bare metal and galvanized.
Color 5 50g 25g grams 1000g 388g rlt tds us eng edition 2.
Raptor tintable base bottle.
Each kit covers approximately 125 square feet enough to do a full size pick up truck bed.
Shoot remove cap and attach to the u pol schutz gun with air pressure 2 76 4 82 bar 40 70 psi.
Abrasion and stain resistant.
Curing is not recommended.
Compatible with both raptor schutz and professional vari nozzle application guns.
